|
PC-8 Fuse Panel and Relay Kit
See details of the PC-8 fuse panel and more information here:
The ABS Kit is longer and uses a Metri-Pack fuseholder as shown above. The Non-ABS Kit uses my regular Cooper-Bussman fuseholder and is shorter. This is because the ABS control units take up a lot of space under the seat so with ABS the fuse panel has to be mounted at the far back of the under seat area. Without ABS you can mount the fuse panel further forward. The Non-ABS Kit has a longer Brake/Tail Adapter and shorter main leads.
|
Bandit 1250/650 ABS PC8 Kit $87.95
|
|
|
Bandit 1250/650 Without ABS PC8 Kit $85.95
|
|
|
Bandit 1200/ GSX600F PC8 Kit $85.95
|
|
|
|
Bandit 1200/600 Kit has this 24" adapter (not shown above)
|
|
|
|
KIT OPTIONS:
Optional Mounting Accessories: You can come up with your own mounting materials and methods but here are some high quality mounting kits to help you mount the PC-8 to your bike.
|
3M Dual Lock Strips $2.95
|
|
Two pairs of 3 inch Dual Lock strips. Great for many other projects too, this material has 5 times more holding strength than regular Velcro. Strips have excellent adhesive on the back. An audible click is produced when the pieces are joined together.
|
M4 Stainless Screws and Nuts (4 sets) $2.49
|
|
|
M4 Stainless Screws to mount from back (4) $1.49
|
|
|
Stainless Self Tapping Screws (4) $1.25
|
|
These are the same as are included with every PC-8.
3 Circuit Solution (3CS)
|
 |
|
|
|
|
|
|
|
|
|
This Kit is complete, including a plug and play Tail Light Adapter, and comes with grounds, fuses, and circuit connectors.
You can order any of the Kits I sell, including Socket Leads, Relay Kits, etc, with the connectors you see to the right factory crimped onto it's main leads. This will allow you to plug 3 complete Kits (circuits) into the 3 Circuit Solution.
And you can of course install the mating connector halves yourself, onto whatever circuit wires you add.
I have chosen this type of connector because it has large enough terminals to carry a 20A current, and its terminals are easy to solder for the DIYer.
Installation instructions and photos look here.
Choose your Kit below:
|
|
|
3 Circuit Solution for Bandit 1250/650 - All Fuses Switched $44.95
|
|
|
|
3 Circuit Solution for Bandit1250/650 - One Fuse Unswitched $44.95
|
|
|
|
3 Circuit Solution for Bandit 1200/600 - All Fuses Switched $44.95
|
|
|
|
3 Circuit Solution for Bandit 1200/600 - One Fuse Unswitched $44.95
|
|
|
Bandit Tail Light Adapters
I do not include the short adapter used on the PC-8 for Bandits with ABS. This is because the longer adapters are easy to shorten.
These are the same adapters as used on the Bandit PC-8 and 3CS Kits. They can be used for different things:
1 - switching power and ground for a relay
2 - auxiliary tail lighting
3 - topbox lighting
Order a couple of Posi-Locks to make it easy to connect to your wiring to the adapters.
|
1250/650 Tail Light Adapter 24" (61 cm) $14.95
|
|
|
1200/600 Tail Light Adapter 24" (61 cm) $14.95
|
|
HB3/HB4 Headlight Relay Kit - Installation notes here.
This Kit is for those bikes with HB3 and HB4 headight bulbs that need relays for brighter lights and higher wattage bulbs. Main leads are 14 AWG wire. All wires are AVX high temperature wire.
Note: 1st Gen (1997-2000) Bandit 1200s have 1 H4 bulb, and 2nd/3rd Gen (2001-2006) have the HB3/HB4 combo. Please check your own headlight bulb(s) before ordering. You never know if the original headlight has been changed or if you have an in between generations model. 1st Generation owners should check out the H4 Kit page if they find they have an H4 bulb.
|
HB3/HB4 Headlight Relay Kit $64.95
|
|
|
