Wiring Kits

Elec. Products

Other Stuff

Clearance

Company

New Stuff
Click Here

NOTE: There is no minimum order but orders under $5 pay extra shipping!

CUSTOM? There is a place at checkout to leave any custom notes. Please use this to remind me of anything we discussed in E-Mail.

WHAT BIKE? I would really appreciate you letting me know what bike the order is for in the checkout comment section.

Go here for Socket Wiring Solutions

Go here for Relay Switched Socket Kits

Go here for Automotive Sockets

Powerlet Socket PSO-001 All aluminum body with snap closed weatherproof cap. Comes with rubber cushion washer and aluminum backing washer. Push on tab terminals in T formation accepts a T-Connector. This Socket needs about 3" (7.5 cm) rear clearance. PSO-001 $17.05 Quantity:

Low Profile Socket Standard socket with soldered on 6" (15 cm) high temp leads. Comes with rubber boot and T-Connector coupler. See how this Kit is made here. This Socket only needs about 1 1/2" (3.8 cm) rear clearance. Get the thick socket spacer below if you want extra rear clearance. LPS $23.95 Quantity:

Powerlet Socket Bar Mount Bracket PBR-011 Available in black only for 7/8" handlebars. Made of tough plastic with a rubber insert to keep from scratching your handlebar. Go here to see close-ups of this bracket with a Socket installed on a bike. PBR-011 $18.95 Quantity:

Thick Socket Spacer PMI-008 Gives any Socket extra rear clearance. With this and the Low Profile Socket above, rear clearance is reduced to 1 1/4" (3.2 cm). Spacer is .31" in thickness. Note: This won't work on really thick panels as the nut won't have enough threads. With a thick panel your rear clearance is automatically reduced. PMI-008 $1.38 Quantity:

Replacement Socket Cap PMI-009 Put a new cap on your old socket and give it new life. Fits most BMW/Hella/Powerlet sockets. PMI-009 $4.70 Quantity:

Cable Socket PSO-004 Installs on two wire ends to make an inline socket. With two push on tab terminals. PSO-004 $12.30 Quantity:

Paneltop Socket PSO-006 Socket mounts on a dash or shelf. With tethered cap and two mounting screws. Molded in finger grip helps hold socket when unplugging. PSO-006 $11.35 Quantity:

Second Socket Splitters

Easily add a second socket to your existing Socket Leads. Designed to plug into the stock T-Connector. Shipped with T-Connectors unplugged to allow you to add rubber boots if you want. Comes in three sizes, custom lengths available. Second Socket Splitter 6" (15 cm) - SSS-006 $6.95 Quantity: Second Socket Splitter 12" (30 cm) - SSS-012 $7.95 Quantity: Second Socket Splitter 24" (61 cm) - SSS-024 $8.95 Quantity: Below you can see the 12" unit with optional rubber boots added. Rubber Boots are available separately on the Socket Wiring Kit Page.