Switches

Eastern Beaver Newsletter to receive our E-Mail Newsletter of new products and special deals.         MINIMUM ORDER IS $20

Note that most 'Kits' are made to order and can take a few days to prepare. You will notified when your order ships. Please do not E-Mail me asking if your order has shipped. Please try not to ask to add something to your order.

[Home] [Main] [Elec. Products] [Switches]
motorcycle switches

BAR - PUSHBUTTON - ROCKERS - TOGGLES

Handlebar SPST On/Off Switch (5A) - For 7/8” and 1” handlebars ONLY!

Specifications:

- 16” (40 cm) sheathed wire leads

- matches most types of stock bike switches

- only 3/4” (2 cm) wide

- great for switching Auxiliary Lights or Headlights

- puts switching right where you need it

- can be mounted on left or right side of bars

- comes with plated 3.96mm bullet connectors with sheaths

- best used for relay switching except low current LEDs etc.

- SPST means it switches one set of contacts on and off.

Price: $19.95

Quantity:

SWITCH_HBS01

Barswitch on Suzuki DL1000

barswitch-on-strom

Barswitch on BMW K100

barswitch_closeup2


Little Pushbutton Momentary Switch (5A)

Small push button momentary ON switch with rubber cover and 12cm (4 1/2”) leads. Leads are 4.5” (11.5 cm).

Fits in a 3/8” (9 mm) hole.

NOTE: This switch will fit panels up to 5mm in thickness.

Push Button Momentary ON Switch - $3.95

Quantity:

push-button-switch
littlepushbutton

Little Pushbutton ON/OFF Switch (5A)

Small push button ON/OFF switch with rubber cover and 12cm (4 1/2”) leads. Leads are 4.5” (11.5 cm).

Fits in a 3/8” (9 mm) hole.

NOTE: This switch will fit panels up to 5mm in thickness.

Push Button ON/OFF Switch - $3.95

Quantity:

lpbswitch-tall


Little Rocker SPST ON/OFF Switch (25A)

Small illuminated ON/OFF rocker switch with rubber seal.

SPST means it switches one set of contacts on and off.

See below for size data.

NOTE: This switch uses .178” push on receptacles.

Little Rocker ON/OFF Switch - $4.95

Quantity:

Little Rocker Kit - $6.49

Quantity:

little rocker 25A
rocker-kit

Kit comes with 3 .187” push on terminals and 2 sheaths.

This switch fits in a 13mm by 19mm hole.


Contura Rocker Switches

LED SPST Rocker Switch (20A)

Contura Rubberized Sealed Rocker Switch with LED indicator lights.

Waterproof switch design has a soft amber light when switch is ON. The ‘label’ area also lights up with a soft green light when the switch is powered. See the Extras Page for info on wiring these switches. The ‘label’ light is great to let you know where the switch is at night, while the amber light indicates the switch is ON.

Accepts push on 1/4” receptacles.

Fits a hole 1 3/8” by 13/16” (35 mm by 20 mm)

SPST means it switches one set of contacts on and off.

SPST ON/OFF Rocker Switch - $7.79

Quantity:

rockerswitch_amber

Switch Cutout No Housing

contura-switch-cutout

Dimensions are in Inches

These LED lights on the switch are very nice, not too bright, not too dim.

Switch off, green running light on.

led-switch-offb_9276

Switch on, amber ON light is also on.

led-switch-onb_9277


Amber Light Contura DPST Rocker Switch (20A)

dpst-rocker-top_0222dpst-rocker-side_0226

This Contura switch differs slightly from the others in that it has no running light, just an amber bulb that’s ON when the switch is turned on. It also fits the housings below. It’s not so bright to be annoying at night, but bright enough to see in the daytime. Cutout dimensions are the same as for the SPST switch above.

DPST means it switches two sets of contacts on and off.

DPST ON/OFF Rocker Switch - $10.95

Quantity:


Contura Switch Single Housing

These housings give the Contura switches a nice finished look. Choose a single or multi housings for more than one switch. See below for samples. Opening should be 47mm by 23mm.  To cut the opening the best way is to cut a bit smaller, then file it out to an exact fit.

Contura Single Housing - $1.49

Quantity:

switch-housing-single_0364
switch-in-single-housing-03
switch-in-single-housing2_0


Contura Switch End Housing

These housings snap together to give multiple Contura switches  a nice finished look. Choose a single or multi housings for more than one switch. See below for samples.

Contura End Housing - $1.49

Quantity:

switch-housing-end_0362

Join two ends together for two switches.

switch-housings-2-ends_0375

Contura Housing Dimensions

contura-housing-dims

Dimensions are in Inches


Contura Switch Center Housing

These housings snap together to give multiple Contura switches  a nice finished look. Choose a single or multi housings for more than one switch. See below for samples.

Contura Center Housing - $1.29

Quantity:

switch-housing-center_0363

Set of two ends and one center housing for three switches.
switch-housings-3_0376

 

Contura Switch Blank Plate

This blank will fill an empty switch housing. You can also drill it to mount a toggle switch, etc.

Contura Blank Plate - $1.29

Quantity:

contura-blank


Toggle Switch (20A) On/Off SPST

Sealed toggle switch comes with full rubber boot. Fits into a 7/16” (11mm) hole. SPST design ON/OFF actuation with two 1/4” tabs.

SPST means it switches one set of contacts on and off.

SPST Toggle Switch - $9.95

Quantity:

togglewithboot_9001


Toggle Switch (20A) On/Off DPST

Sealed toggle switch comes with full rubber boot. Fits into a 7/16” (11mm) hole. DPST design ON/OFF actuation with four 1/4” tabs. See tab assignments here.

DPST means it switches two sets of contacts on and off.

On/Off DPST Toggle Switch - $10.95

Quantity:

tiggle-dpst