Quick Links to the terminals on this Page

Rings  -  Forks  - .187”  -  .250” Brass  -   Plated .250” Receptacles  -  Plated .250” Tabs -  .250” Flags  -  .250” Tab Doubler -  .305”/.312”  - Splices  

Ring Terminals - For a crimper for these terminals and more look here.

M8 Thick Solid brass made by Yazaki  in Japan. Fits wires from 3-5 sqmm (12-10 AWG). Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts. Click below to buy: Yazaki 7009-1334 ( 70091334 )   M8-5/10Awg Brass Ring Terminal -  $0.41 ea Quantity:

M8 Solid brass made by Mitsubishi  in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts. Click below to buy: M8-3/12Awg Brass Ring Terminal   $0.35 ea Quantity:

M8 Solid brass made by Mitsubishi  in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts. Click below to buy: M8-2 -  $0.35 ea Quantity:

M6 Thick Solid brass made by Yazaki in Japan. Fits wires from 3 - 5 sqmm (12 - 10 AWG). Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts. Click below to buy: M6-3-5 -  $0.40 ea Quantity:

M6 Solid brass made by Mitsubishi  in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts. Click below to buy: M6-3 -  $0.35 ea Quantity:

M6 Thick Solid brass made by Hero  in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts. Click below to buy: M6-2 -  $0.35 ea Quantity:

M5 Thick Solid brass made by Yazaki in Japan. Fits wires from 3 - 5 sqmm (12 - 10 AWG). Hole is 5.4 mm in diameter to fit smaller bike battery bolts. Also fits PC-8, AP-1 and AP-2 terminal studs. Click below to buy: M5-3-5 -  $0.40 ea Quantity:

M5 Solid brass made by Hero in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Hole is 5.4 mm in diameter to fit smaller bike battery bolts. Also fits PC-8, AP-1 and AP-2 terminal studs. Click below to buy: M5-2 (B-24) -  $0.35 ea Quantity:

M4 Thick Solid brass made by Yazaki  in Japan. Fits wires from 3-5 sqmm (12-10 AWG). Click below to buy: M4-3-5 -  $0.38 ea Quantity:

M4 Solid brass made by Mitsubishi  in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Click below to buy: M4-3 (BLA-204) -  $0.35 ea Quantity: LIMITED QUANTITIES ~ 80 Available 1/23/2023 Replaced by M4-3-5 above.

M4 Tin Plated Solid brass made in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Click below to buy: M4-2 (B-12) -  $0.35 ea Quantity:

Fork Ring Terminals

M6 Thick Solid brass made by Hero  in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts. Click below to buy: BLE-206 -  $0.38 ea Quantity:

M6 Thick Solid brass made by Mitsubishi  in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts. Click below to buy: BLE-106 -  $0.30 ea Quantity:

M5 Thick Solid brass made by Mitsubishi  in Japan. 105- fits wires from .75 - 2 sqmm (18 - 14 AWG). 205 - fits wires from 2.0 - 3 sqmm (14 - 12 AWG) Click below to buy: BLE-105 -  $0.30 ea Quantity: BLE-205 -  $0.45 ea Quantity:

M4 Thick Solid brass made by Hero  in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Click below to buy: BLE-104 -  $0.30 ea Quantity:

Amp .187” Faston Receptacles  - look here for sheaths

Solid brass receptacle made by Amp. Fits wires from .7m - 2 sqmm (18 - 14 AWG). Fits a tab .187 inch in width. Click below to buy: Amp 62016-1 -  $0.16 ea Quantity:

JST .187” Receptacles and Tabs

Tin plated brass tab and receptacle made by JST. Fits wires from .5m - 1.25 sqmm (20 - 16 AWG). Tab is .187 inch in width. Click below to buy: Male Tab JST-M-187 -  $0.15 ea Quantity: Female Rec JST-F-187 -  $0.15 ea Quantity:

Nippon Tanshi F187 Flag Terminal

Tin plated brass tab and receptacle made by JST. Used for front brake switch connections on many bike. Fits wires from .5m - 1.25 sqmm (20 - 16 AWG). Fits 250 flag sheaths Click below to buy: Female Flag NT-F187F -  $0.12 ea Quantity:

Brass Yazaki .250” Terminals

These terminals are designed with a locking tab to lock into connector housings.

Solid brass receptacle made by Yazaki in Japan. Fits wires from .7m - 2 sqmm (18 - 14 AWG). Locks into connector housings. Takes a tab .250 inch in width. Click below to buy: 2 sq mm Female Brass Receptacle -  $0.12 ea Quantity:

Solid brass receptacle made by Yazaki in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Locks into connector housings. Takes a tab .250 inch in width. Click below to buy: 3 sq mm Female Brass Receptacle -  $0.13 ea Quantity:

Special 1P Housing Female Terminal. Fits wires from .7m - 2 sqmm (18 - 14 AWG). Locks into connector housings - has extra force inner plate. Takes a tab .250 inch in width. Click below to buy: 2 sq mm Female Brass Special Terminal -  $0.24 ea Quantity:

Solid brass tab made by Yazaki in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Locks into connector housings. Tab is .250 inch in width. Click below to buy: 2 sq mm Male Tab Terminal -  $0.12 ea Quantity:

Solid brass tab made by Yazaki in Japan. Fits wires from 2 - 3 sqmm (14 - 12 AWG). Locks into connector housings. Tab is .250 inch in width. Click below to buy: 3 sq mm Male Tab Terminal -  $0.13 ea Quantity:

Tin Plated Amp Faston .250” Receptacles

These terminals are designed with a locking dimple to lock onto tabs with a mating hole.

For sheaths for these terminals go here. Wire to wire Wire to tab

These terminals are designed to plug onto a device’s tab, such as a switch. They can also join with a male type to form an inline connection. They have a dimple to lock them in place.  They’re not designed to fit into plastic connectors.

Tin Plated Nippon Tanshi 2418 Fits wires from .3 - .75 sqmm (24 - 18 AWG). Dimple locks onto matching tab hole. Tab opening is .250 inch in width. Click below to buy: NT-250-2418-R -  $0.12 ea Quantity:

Tin Plated brass Amp Faston # 60635 Fits wires from 2 - 5 sqmm (14 - 10 AWG). Fits large single or multiple wires. Dimple locks onto matching tab hole. Tab opening is .250 inch in width. Click below to buy: With Locking Dimple -  $0.20 ea Quantity:

Amp Fastin-Faston .250” Receptacles

AMP Fastin-Fastons are designed for wires which plug into a connector housing. They have a tab which locks them into the housing.

Tin Plated brass Amp Fastin-Faston# 42100 Fits wires from .75 - 2 sqmm (18 - 14 AWG). Snaps into connector housings. Tab opening is .250 inch in width. Click below to buy: With Locking Tab -  $0.18 ea Quantity:

Tin Plated brass Amp Fastin-Faston# 60253 Fits wires from 2 - 5 sqmm (14 - 10 AWG). Fits large single or multiple wires. Snaps into connector housings. Tab opening is .250 inch in width. Click below to buy: With Locking Tab -  $0.20 ea Quantity:

Tin Plated brass Amp Fastin-Faston# 42281 Fits wires from .75 - 2 sqmm (18 - 14 AWG). Special receptacle with dimple for single connectors. Snaps into connector housings. Tab opening is .250 inch in width. Click below to buy: With Locking Tab and Dimple -  $0.24 ea Quantity:

Tin Plated brass Amp Fastin-Faston# 60249 Fits wires from 1.25 - 3 sqmm (16 - 12 AWG). Special receptacle with dimple for single connectors. Snaps into connector housings. Tab opening is .250 inch in width. Click below to buy: With Locking Tab and Dimple -  $0.28 OUT OF STOCK

Flag .250” Receptacles by Nippon Tanshi

Special Flag Receptacle Fits wires from .75 - 2 sqmm (18 - 14 AWG). Fits a tab .250 inch in width. Sheaths for these here. 250 Flag Receptacle -  $0.15 ea Quantity:

Special ‘Spade Doubler’ .250” Terminal

Hero B-50 Special Terminal Fits wires from .75 - 2 sqmm (18 - 14 AWG). Takes/has a tab .250 inch in width. Click below to buy: Spade Doubler Terminal -  $0.75 ea Quantity:

Tin Plated Amp Fastin-Faston .250” Tabs

These terminals are designed with a locking tab to lock into connector housings.

Tin Plated brass Amp Fastin-Faston# 42460 Fits wires from .75 - 2 sqmm (18 - 14 AWG). Snaps into connector housings. Tab is .250 inch in width. Click below to buy: With Locking Tab -  $0.24 ea Quantity:

Tin Plated brass Amp Fastin-Faston# 60701 Fits wires from 1.25 - 3 sqmm (16 - 12 AWG). Snaps into plug housings. Tab is .250 inch in width. Click below to buy: With Locking Tab -  $0.28 ea (temporarily out of stock)

Brass .312” Flag Receptacle

This terminal is designed to fit my H4 Socket.

Solid brass flag receptacle made in Japan. Fits wires from .75 - 2 sqmm (18 - 14 AWG). Takes a tab .305 inch in width (H4 bulb tabs). Click below to buy: .312” H4 Flag Receptacle -  $0.25 ea Quantity:

Brass .312” Straight Receptacles

Fits wires from .75mm - 2mm (18 - 14 AWG). Click below to buy: .312” Female .75-2mm Terminal  -  $0.35 ea Quantity:

Fits wires from 3 - 5 sq mm. (12-10 AWG) Click below to buy: .312” Female 3-5mm Terminal -  $0.35 ea Quantity:

Brass .312” Straight Tabs

This terminal is designed to fit my H4 Coupler.

Fits wires from .75mm - 2mm (18 - 14 AWG). Click below to buy: .312” Male .75-2mm Terminal -  $0.35 ea Quantity:

Fits wires from 3 - 5 sq mm. (12-10 AWG) Click below to buy: .312” Male 3-5mm Terminal -  $0.35 ea Quantity:

Splice Terminals

These terminals are used to join various wire sizes.

B-48 -  $0.21 ea Quantity: B-48 is a small splice used to join 2-3 wires from 22-14 AWG. B-49 -  $0.39 ea Quantity: B-49 is a large splice used to join 2-4 wires from 14-10 AWG. Examples: Will do a 12 AWG to 12 AWG wire, or 3 16 AWG wires into one 12 AWG wire. The Hero BL-255 crimper will do these combos and more. B-80 -  $0.45 ea Quantity: B-80 is a small splice used to join 2-3 wires from 22-18 AWG. Has insulation crimp tabs too. NEW - splice crimps from Nippon Tanshi NT 1612 - Splice crimp for AWG 16-12  -  $0.12 ea Quantity: This crimp will do max wire size of around 12AWG. It is slightly bigger than the B48 above. NT 1210 - Splice crimp for AWG 12-10  -  $0.13 ea Quantity: This crimp will do max wire size of two 12 AWG wires. It is slightly smaller than the B49 above. NT 1008 - Splice crimp for AWG 10-08  -  $0.15 ea Quantity: This crimp will do max wire size of two 10 AWG wires. It’s huge.