|
Available with 1 Fuse Unswitched or All Fuses Switched.
NEW STYLE FUSEBOXES - These fuseboxes now take ATM fuses.
Above - 6 Fuse Fusebox Relay Kit 24" (61 cm) - 1 Fuse Unswitched
Kit Description:
These Kits include a Heavy Duty Panasonic 40A relay with socket, main fuseholder, and 6 position fusebox. Two 30A fuses are included for the main fuseholder, The fusebox comes with 6 fuses as shown above. Cable ties to complete the job are also included.
These Kits use Amp Faston tin plated terminals. These terminals lock onto the fusebox and will not work their way off. Make sure you have everything positioned correctly before pushing on the input terminals. Yes, you can remove them if you have to.
The main leads and fuseholder are 12 AWG wire. The relay trigger wire is 24" (61 cm) of 16 AWG wire. A Posi-Tap is included to make switching hookup easy without damaging the tapped wire.
Kit length is measured from the battery positive terminal to the fusebox. The negative battery lead is 6" longer than the Kit.
Measure from the positive battery post to the fusebox location and add a few inches. Add more length according to routing around frame, etc. Switching leads can be easily shortened according to your needs.
Got a VStrom? Look here for a unique relay switching adaptor for your bike.
Choose your length in the boxes below.
30 Amp 6 Fuse Relay Kit - 1 Fuse Unswitched
30 Amp 6 Fuse Relay Kit - All Fuses Switched
Female Push-On Terminals with Locking Dimple
These are high quality Nichifu terminals made in Japan. They are tin plated brass with a full metal sleeve over both crimping areas. They have a locking dimple so they won't come loose from the mating tab.

|
Red female insulated spade terminal - $0.14 ea
|

|
Blue female insulated spade terminal - $0.15 ea
|
WIRE LOOMS
Go HERE for Wiring Looms.
Description: 48" (120 cm) wiring loom for running several wires inside one sheath. Cut to your needs, install Posi-Locks for connecting anything on your bike, crimp on terminals, or order one custom made to your exact requirements with factory crimped terminals. Run one pair of 16 AWG wires to a socket, connect your GPS, Radio, Radar Detector cords to 20 AWG wires, the possibilities are mind boggling! One large Posi-Lock can connect several wires to gang up low current devices, or split grounds. Available in other wire sizes, lengths, and terminals too.
See here to buy Posi-Lock Products.
See here to buy crimp terminals and other parts.
Most items are in stock and ship out immediately. However, there are times when we are out of stock. You will be notified by E-mail if an item is out of stock. Express shipping via EMS Airmail is available - click here. We normally use international 'small packet' airmail shipping which is fast and reasonably priced. Shipping to the USA, Australia, Canada, and Europe usually takes about a week.
|