|
Metri-Pack 30A Fuseholder for ATM Type Mini Blade Fuses
 |
|
|
See further down this page for ATM fuses.
|
|
|
This fuseholder comes with all the parts above to integrate it into your wiring.
Terminals and seals will fit 12-16 AWG wire.
Available with custom length/gauge leads by special order.
 |
 |
Click below to order:
|
 |
|
|
MP Fuseholder $3.95
|
|
|
Below you can see Fused Socket Leads 10" with the Weatherpack fuseholder.
Powerlet 30A Sealed Fuseholder for ATO/F Type Full Size Blade Fuses
Terminals will fit 14-18 AWG wire.
Cooper-Bussman 30A Fuseholder for ATM Type Mini Blade Fuses
This high quality fuseholder will work for any project where you need to add a fuse.
- 4" (10 cm) 12 AWG leads molded into fuseholder on each side
- good for a maximum of 30A
- small size fits easily anywhere on a bike
- replaceable weatherproof cap
- made in U.S.A.
|
30 Amp ATM Weatherproof Fuseholder - $1.95
|
|
See further down this page for fuses.
Dual Kit Adaptor:
Using the special battery adaptor below you can attach two Kits to your battery using only one pair of ring terminals. You will have separate fusing for each Kit.
The Kit's main hot leads plug into the fuseholders, while the negative leads will have to be cut, stripped, and inserted into the Posi-Locks.
These are the same fuseholders as above and used on my Kits. They take ATM mini spade fuses and are good for up to 30A each.
Use two of these units instead of a Fuse Panel!
See further down on this page for fuses. Posi-Locks, and matching male Bullet Connectors are available on my other webpages.
Mini ATM Blade Fuses
5A ATM Blade Fuse
7.5A ATM Blade Fuse
10A ATM Blade Fuse
15A ATM Blade Fuse
20A ATM Blade Fuse
30A ATM Blade Fuse
Most items are in stock and ship out immediately. However, there are times when we are out of stock. You will be notified by E-mail if an item is out of stock. Express shipping via EMS Airmail is available - click here. We normally use international 'small packet' airmail shipping which is fast and reasonably priced. Shipping to the USA, Australia, Canada, and Europe usually takes about a week.
|