Main
[Main] [Bike Specific] [Fuseboxes] [Elec. Products] [Connectors] [Wiring Kits] [Fasteners] [Tools] [Company] [Clearance] [New Stuff] [Shipping]

Visit our Facebook page

MINIMUM ORDER IS $10 (not including shipping). I’m sorry but I will refund all orders less than $10.
 If you are in a hurry please make sure you get fast EMS shipping, see our Shipping Page for details.

Switch Brackets & Handle Bar Accessories

Please note -All items on this page are made to order. We do not accept cancellation on order for these items. Unless otherwise indicated, all brackets are painted with fuel resistant paint and metal has been media blasted for good paint adhesion. Please take care for mirror mounts re the hole size, and make sure you order the correct size.

.
Super Tenere Gen 1 Left Side Switch
KTM SDR 1290 Gen 1/2 Left Side Switch
 
 
 
 
 
 
 
 
Super Tenere XT1200Z Gen 1 Left Side Switch - Mirror Mount

Fits early model Super Ternere 1200's. May fit other models. Switch section is 30mm from mirror hole center. M6 hole is
15mm from mirror hole center. Switch is rated up to 10A. Manufactured to order so we do not accept cancellations on this part.


Fig 1: Mirror mount bracket with  switch ( internal LED ) & mating male MT-090 connector.

Super Tenere XT1200Z Gen 1 Left Switch Mount  $19.95


Quantity:

KTM 1290 Gen 1 & 2 Left Side Switch
 

Fits kTM Super Duke R 1290's Gen 1 and Gen 2. Allows mounting of a dimmer or heat controller on top and has an inbuilt switch. The switch is SPST toggle. Momentary switches are available on request.
Switches are rated at 10A continuous, at 14v.  Manufactured to order so we do not accept cancellations on this part.

 
Mirror center to switch section is 25mm.
Mirror hole is 8mm. Spacer is 20mm.
10Amp rated.
3 wire with LED when ON.
MT-090 Male Connector ( female supplied with terminals )


Figure 2: KTM SDR 1290 Gen 1/2 Left Side Mirror Mount

KTM 1290 SDR Gen 1/2 Left Switch Bracket  $21.95


Quantity: