|
H4 Sockets and Plugs
 H4 Socket
Heavy duty housing with 3 H4 flag terminals.
Features rear cover to help keep out dirt and moisture.
|
.305” H4 Socket with 3 Terminals - $2.95/EA
|
Extra Terminals for H4 Socket
Made in Japan by Mitsubishi
Fits wires from .75mm - 2mm (18 - 14 AWG).
Click below to buy:
|
.305” Female Flag Terminals - $0.25/EA
|
 H4 Coupler
Heavy duty housing with 3 open barrel terminals.
Plugs into any H4 socket.
 Extra Terminals for H4 Coupler
Made in Japan by Yazaki.
Fits wires from .75mm - 2mm (18 - 14 AWG).
Click below to buy:
|
.305” Male Terminals - $0.35/EA
|
|
H1 Bulb Kit - sorry no longer available
|
|
|
|
|
Locking bulb connector with a 6” (15 cm) 14 AWG lead and bullet connector. Matching bullet connector and ground terminal are included.
|
|
|
 |
|
|
H3 Bulb Kit - sorry no longer available
|
|
|
|
Bulb connector with long sheath and a 6” (15 cm) 14 AWG lead and bullet connector. Matching bullet connector and ground terminal are included.
|
|
|
 |
|
|
H3C Bulb Kit - sorry no longer available
|
|
|
|
Locking bulb connector with 6” (15 cm) 14 AWG leads and bullet connectors. Matching bullet connectors are included.
|
|
|
 |
|
|
|
|
|
Locking bulb Socket for HI Beam
With 2 terminals and 2 seals.
|
|
|
HB3 Socket - $4.29
|
|
|
|
|
|
|
|
|
Locking bulb Socket for LO Beam
With 2 terminals and 2 seals.
|
|
|
HB4 Socket - $4.29
|
|
|
|
HB4/HB4 Terminals and Seals
Now you can replace those corroded old terminals and their seals. This type is stock on Mazdas,
Toyota and many other makes. Corroded terminals can lead to headlights going off randomly and less than full power to the bulbs. If you have noticed any headlight flickering or going out when you move your bulb socket, you MUST replace these terminals.
If your sockets look like the ones above then you can replace its terminals and seals with these. They will not fit other makes, only Sumitomo.
Toyota part number
82998-12550
|
|
|
Terminal - $0.65
1400-0350
|
|
|
|
|
