ON THIS PAGE:    Mass Air Flow Connectors

AMP TE ( Tyco )

6 Position AMP TE ( Tyco ) Sealed Female Connector
Type: B ( Left Side Key )

Fits wires from .3mm - 0.5mm (24 - 22 AWG).

With complete set of terminals.

Used on Mass Air Sensor Connectors on many cars
 

6 Position AMP TE (B) Sealed  Set  $9.99


Quantity:

Mass Air Sensor Connector

             

 

Extra Terminals Female $0.50

Quantity:

           


6 Position AMP TE ( Tyco ) Sealed Female Connector
Type:
A ( Right Side Key )

Fits wires from .3mm - 0.5mm (24 - 22 AWG).

With complete set of terminals.

Used on Mass Air Sensor Connectors on many cars

 

6 Position AMP TE Sealed  Set  $9.99

Quantity:

Mass Air Sensor Connector

                 

 

 

 

Terminal Same as Above


 


 


 

 

              

 
 

 

 

 

            

 


Reference Data

These connectos are made by AMP/TE but are also called Tyco. Used on many MAF sensors. There are 4 keying types. Make sure you buy the right type.
All connectors use the same pins. Some version are only available in very large quantities, so we do not stock.

 

     

 

Installing the Terminals

Pry off the red section with s jewellers screwdriver. Insert the wire from the rear of the connector ( un-stripped ).

     

Strip off about 5mm of the insulation. Crimp the terminal on the wire. Pull the terminal back into the connector. Reinstall the red cover ( locks the terminals in place ).