These unique and hard to find connectors are some of the earliest sealed types. Using .250” terminals, they are capable of currents up to 20A. Some bikes from the mid 80s through the 90s used these on the alternator connector. Other uses I’m unsure of, but these large connectors are easy to identify. We sell these with medium sized terminals, but you can buy smaller and larger terminals at the bottom of this page, if you need them.
1P DS-250 CONNECTOR
Fits wires 18 to 14 AWG wire.
Uses tangless terminals.
|
|
|
|
|
1P-DS-Seal Only - $0.55 ea
|
|
|
|
|
2P DS-250 CONNECTOR
Fits wires 18 to 14 AWG wire.
Uses tanged terminals.
|
|
|
|
|
2P-DS-Seal Only - $0.65 ea
|
|
|
|
|
3P DS250 CONNECTOR
Fits wires 18 to 14 AWG wire.
Uses tangless terminals.
|
|
|
|
|
3P-DS-Seal Only - $0.75 ea
|
|
Used on Raptor 700 Stator ( YFM700R )
YFM350, YFM400 |
|
|
|
|
3P-DS250-Female - $2.95 ea
|
|
|
|
4P DS250 CONNECTOR
Fits wires 18 to 14 AWG wire.
Uses tanged terminals.
|
|
|
|
|
4P-DS-Seal Only - $0.85 ea
|
|
|
|
|
|
|
4P-DS250-Female - $4.49 ea
|
|
|
|
5P DS250 CONNECTOR
Fits wires 18 to 14 AWG wire.
Uses tanged terminals.
|
|
|
|
|
|
5P-DS-Seal Only - $0.95 ea
|
|
|
|
|
|
5P-DS250-Female - $4.95 ea
|
|
|
|
Extra Terminals for DS250 Series - note, two types are used, tangless and tanged
Tangless 250” Brass Terminals - used for 1P and 3P connectors in this series.
.250” Tangless Female Brass Terminals
$0.12 Each
On the right all three sizes are shown. Choose your size according to the wire size to be used. Terminal ‘size’ is the maximum size wire it will take.
|
|
|
|
|
|
|
.250 Tangless Male Brass Tabs
$0.16 Each
On the right all three sizes are shown. Choose your size according to the wire size to be used. Terminal ‘size’ is the maximum size wire it will take.
|
|
|
|
|
|
Tanged 250” Brass Terminals - used for 2P,4P and 5P connectors in this series.
Solid brass made in Japan.
Fits wires from .75mm - 2mm (18 - 14 AWG).
Snaps into connector housings.
Spade is .250 inch in width.
Click below to buy:
|
|
|
2 sq mm Male Brass Tab - $0.12 ea
|
|
|
|
|
Solid brass made in Japan.
Fits wires from 2mm - 3mm (14 - 12 AWG).
Snaps into connector housings.
Spade is .250 inch in width.
Click below to buy:
|
|
3 sq mm Male Brass Tab - $0.13 ea
|
|
|
|
Solid brass made by Yazaki in Japan.
Fits wires from .75mm - 2mm (18 - 14 AWG).
Snaps into connector housings.
Accepts a tab .250 inch in width.
Click below to buy:
|
|
2 sq mm Female Brass Receptacle - $0.12
|
|
|
|
Solid brass made by Yazaki in Japan.
Fits wires from 2mm - 3mm (14 - 12 AWG).
Snaps into connector housings.
Accepts a tab .250 inch in width.
Click below to buy:
|
|
|
3 sq mm Female Brass Receptacle $0.13
|
|
|
|
|
|