Open Barrel

Follow Eastern Beaver on Facebook. Chat, ask questions, see specials.      MINIMUM ORDER IS $20 - shipping will be very high until the minimum order is met. Note that most 'Kits' are made to order and can take a few days to prepare. You will notified when your order ships. Please do not E-Mail me asking if your order has shipped. Please try not to ask to add something to your order.

[Home] [Main] [Elec. Products] [Terminals] [Open Barrel]

Quick Links to the terminals on this Page

Rings  -  Forks  - .187”  -  .250” Brass  -   Plated .250” Receptacles  -  Plated .250” Tabs.250” Flags  -  .250” Tab Doubler.305”/.312”  - Splices  

Ring Terminals - For a crimper for these terminals and more look here.

M8 Thick Solid brass made by Yazaki  in Japan.

Fits wires from 3-5 sqmm (12-10 AWG).

Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts.

Click below to buy:

M8-3-5 -  $0.42 ea

Quantity:

M8-3-5


M8 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts.

Click below to buy:

M8-3 -  $0.35 ea

Quantity:

bla-208_0299

M8 Solid brass made by Hero in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Hole is 5/16” (8.2 mm) in diameter to fit most car battery bolts.

Click below to buy:

M8-2 -  $0.30 ea

Quantity:

bla-108_0299

M6 Thick Solid brass made by Yazaki in Japan.

Fits wires from 3 - 5 sqmm (12 - 10 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6-3-5 -  $0.40 ea

Quantity:

3mmringterminal

M6 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6-3 -  $0.30 ea

Quantity:

bla-206_0304

M6 Thick Solid brass made by Hero  in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6-2 -  $0.30 ea

Quantity:

bla-106

M6 Solid brass made by Yazaki in Japan.

Fits wires from .75 - 1.25 sqmm (18 - 16 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6-1.25 -  $0.18 ea

Quantity:

2mmringterminal

M5 Thick Solid brass made by Yazaki in Japan.

Fits wires from 3 - 5 sqmm (12 - 10 AWG).

Hole is 5.4 mm in diameter to fit smaller bike battery bolts. Also fits PC-8, AP-1 and AP-2 terminal studs.

Click below to buy:

M5-3-5 -  $0.40 ea

Quantity:

yrt5-3-5_1997

M5 Thick Solid brass made by Hero in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Hole is 5.4 mm in diameter to fit smaller bike battery bolts. Also fits PC-8, AP-1 and AP-2 terminal studs.

Click below to buy:

M5-3 -  $0.35 ea

Quantity:

hero205

M5 Solid brass made by Hero in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Hole is 5.4 mm in diameter to fit smaller bike battery bolts. Also fits PC-8, AP-1 and AP-2 terminal studs.

Click below to buy:

M5-2 -  $0.25 ea

Quantity:

hero105

M4 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Click below to buy:

M4-3 -  $0.35 ea

Quantity:

bla-204_1969

M4 Thick Solid brass made by Hero  in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M4-2 -  $0.30 ea

Quantity:

bla-104_1967

M3 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Click below to buy:

M3-3 -  $0.32 ea

Quantity:

bla-103_1945

M3 Thick Solid brass made by Hero  in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Click below to buy:

M3-2 -  $0.26 ea

Quantity:

bla-103_1945


Fork Ring Terminals

M6 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6F-3 -  $0.38 ea

Quantity:

ble-206_1949

M6 Thick Solid brass made by Hero  in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Hole is 1/4” (6.4 mm) in diameter to fit most bike battery bolts.

Click below to buy:

M6F-2 -  $0.30 ea

Quantity:

ble-106_1948

M5 Thick Solid brass made by Hero  in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Click below to buy:

M5F-3 -  $0.35 ea

Quantity:

ble-205_1947

M5 Thick Solid brass made by Hero  in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Click below to buy:

M5F-2 -  $0.30 ea

Quantity:

ble-105_1946


Amp .187” Faston Receptacles  - look here for sheaths

Solid brass receptacle made by Amp.

Fits wires from .7m - 2 sqmm (18 - 14 AWG).

Fits a tab .187 inch in width.

Click below to buy:

Amp 62016-1 -  $0.16 ea

Quantity:

F187-tin

JST .187” Receptacles and Tabs

Tin plated brass tab and receptacle made by JST.

Fits wires from .5m - 1.25 sqmm (20 - 16 AWG).

Tab is .187 inch in width.

Click below to buy:

Male Tab JST-M-187 -  $0.15 ea

Quantity:

Female Rec JST-F-187 -  $0.15 ea

Quantity:

187-term-set

 


Brass Yazaki .250” Terminals

These terminals are designed with a locking tab to lock into connector housings.

Solid brass receptacle made by Yazaki in Japan.

Fits wires from .7m - 2 sqmm (18 - 14 AWG).

Locks into connector housings.

Takes a tab .250 inch in width.

Click below to buy:

2 sq mm Female Receptacle Terminal -  $0.12 ea

Quantity:

2mmfemalespadeterminal

Solid brass receptacle made by Yazaki in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Locks into connector housings.

Takes a tab .250 inch in width.

Click below to buy:

3 sq mm Female Receptacle Terminal -  $0.13 ea

Quantity:

3mmfemalespadeterminal

Special 1P Housing Female Terminal.

Fits wires from .7m - 2 sqmm (18 - 14 AWG).

Locks into connector housings - has extra force inner plate.

Takes a tab .250 inch in width.

Click below to buy:

2 sq mm Female Special Terminal -  $0.24 ea

Quantity:

f250-special

Solid brass tab made by Yazaki in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Locks into connector housings.

Tab is .250 inch in width.

Click below to buy:

2 sq mm Male Tab Terminal -  $0.12 ea

Quantity:

250-male-2

Solid brass tab made by Yazaki in Japan.

Fits wires from 2 - 3 sqmm (14 - 12 AWG).

Locks into connector housings.

Tab is .250 inch in width.

Click below to buy:

3 sq mm Male Tab Terminal -  $0.13 ea

Quantity:

250-male-3


Tin Plated Amp Faston .250” Receptacles

These terminals are designed with a locking dimple to lock onto tabs with a mating hole.

 

For sheaths for these terminals go here.

Wire to wire

sheaths-2

Wire to tab

250-f-sheath-short_1968


Amp Faston .250” Receptacles

AMP Fastons are designed for wires which plug onto a device’s tab, such as a switch or single wire with tab. They have a dimple to lock them in place but no tab to lock into a housing.

Tin Plated brass Amp Faston # 42640-2

Fits wires from .4 - .75 sqmm (22 - 18 AWG).

Dimple locks onto matching tab hole.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Dimple -  $0.18 ea

Quantity:

amp-42640-2_2128

Tin Plated brass Amp Faston # 41832

Fits wires from 1.25 - 2 sqmm (16 - 14 AWG).

Dimple locks onto matching tab hole.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Dimple -  $0.18 ea

Quantity:

amp_41832

Tin Plated brass Amp Faston # 60635-1

Fits wires from 2 - 5 sqmm (14 - 10 AWG).

Fits large single or multiple wires.

Dimple locks onto matching tab hole.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Dimple -  $0.20 ea

Quantity:

amp_60635-1

Amp Fastin-Faston .250” Receptacles

AMP Fastin-Fastons are designed for wires which plug into a connector housing. They have a tab which locks them into the housing.

Tin Plated brass Amp Fastin-Faston# 42100-2

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Snaps into connector housings.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Tab -  $0.18 ea

Quantity:

amp_42100-2

Tin Plated brass Amp Fastin-Faston# 60253-2

Fits wires from 2 - 5 sqmm (14 - 10 AWG).

Fits large single or multiple wires.

Snaps into connector housings.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Tab -  $0.20 ea

Quantity:

amp_60253-2

Tin Plated brass Amp Fastin-Faston# 42281-2

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Special receptacle with dimple for single connectors.

Snaps into connector housings.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Tab and Dimple -  $0.24 ea

Quantity:

amp_42100-2

Tin Plated brass Amp Fastin-Faston# 60249-2

Fits wires from 1.25 - 3 sqmm (16 - 12 AWG).

Special receptacle with dimple for single connectors.

Snaps into connector housings.

Tab opening is .250 inch in width.

Click below to buy:

With Locking Tab and Dimple -  $0.28 ea

Quantity:

amp_rec_60249-2

Flag .250” Receptacles

Special Flag Receptacle

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Dimple locks onto matching tab hole.

Fits a tab .250 inch in width.

Click below to buy:

250 Flag Receptacle -  $0.25 ea

Quantity:

250-flag


Special ‘Spade Doubler’ .250” Terminal

Hero B-50 Special Terminal

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Takes/has a tab .250 inch in width.

Click below to buy:

Spade Doubler Terminal -  $0.75 ea

Quantity:

spade-doubler-250

Tin Plated Amp Fastin-Faston .250” Tabs

These terminals are designed with a locking tab to lock into connector housings.

Tin Plated brass Amp Fastin-Faston# 42460-2

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Snaps into connector housings.

Tab is .250 inch in width.

Click below to buy:

With Locking Tab -  $0.24 ea

Quantity:

amp_tab_42460-2

Tin Plated brass Amp Fastin-Faston# 60701-1

Fits wires from 1.25 - 3 sqmm (16 - 12 AWG).

Snaps into plug housings.

Tab is .250 inch in width.

Click below to buy:

With Locking Tab -  $0.28 ea

Quantity:

amp_tab_60701-1


Brass .312” Flag Receptacle

This terminal is designed to fit my H4 Socket.

Solid brass flag receptacle made in Japan.

Fits wires from .75 - 2 sqmm (18 - 14 AWG).

Takes a tab .305 inch in width (H4 bulb tabs).

Click below to buy:

.312” H4 Flag Receptacle -  $0.25 ea

Quantity:

H4socket


Brass .312” Straight Receptacles

Fits wires from .75mm - 2mm (18 - 14 AWG).

Click below to buy:

.312” Female .75-2mm Terminal  -  $0.35 ea

Quantity:

305fspades_lock


Fits wires from 3 - 5 sq mm. (12-10 AWG)

Click below to buy:

.312” Female 3-5mm Terminal -  $0.35 ea

Quantity:

305-females-3-5

Brass .312” Straight Tabs

This terminal is designed to fit my H4 Coupler.

Fits wires from .75mm - 2mm (18 - 14 AWG).

Click below to buy:

.312” Male .75-2mm Terminal -  $0.35 ea

Quantity:

305-males-1-2

Fits wires from 3 - 5 sq mm. (12-10 AWG)

Click below to buy:

.312” Male 3-5mm Terminal -  $0.35 ea

Quantity:

305-males-3-5


Splice Terminals

These terminals are used to join various wire sizes.

splice-terminals_1779

B-48 -  $0.21 ea

Quantity:

B-48 is a small splice used to join 2-3 wires from 22-14 AWG.

B-49 -  $0.39 ea

Quantity:

B-48 is a large splice used to join 2-4 wires from 14-10 AWG. Examples: Will do a 12 AWG to 12 AWG wire, or 3 16 AWG wires into one 12 AWG wire. The Hero BL-255 crimper will do these combos and more.

B-80 -  $0.45 ea

Quantity:

B-48 is a small splice used to join 2-3 wires from 22-18 AWG. Has insulation crimp tabs too.