CB500X & CB400X Electrical Accessories

Table of Contents

NOTE 1: All kits can be ordered with the tail light splitter rather than the under-seat auxiliary connection, for situations where the auxiliary output is used for another purpose. See the bottom of the page for that option

NOTE 2: The CB400X ( Japanese model ) uses a different auxiliary power connector. To order for the CB400X add the $0 option at the end of the page with the kit you want. We will make sure the correct switching lead is included.

CB500X PC-8R Accessory Fuse Box

This kit is plug and play. It provides 8 electrical accessory connections with 2 un-switched and 6 switched ( that power on when the bike is turned on ). You can connect trickle
chargers through the un-switched positions. USB chargers, Navigation systems, heated grips, radar detectors and other devices can be connected to the switched outputs.
Manufactured in Japan using RoHS and UL approved component, this accessory fuse box is built to last. Many owner transfer to their new bike when they upgrade, just buy
the appropriate wiring kit and use the same fuse box. Built to last!

This kit is rated at either 30A or 40A, more than enough for the CB500X.with its 500w charging system ( about 333w (23A) after the bike ECU/ABS/Dash/lights  ).

PowerLink Version Shown. Switching lead is changed to tail light using a splitter ( included ).

CB500X PC-8R Fuse Box Kit

PC-8R plug and play kit for the CB500X. These kits are available with ring terminals for battery connection or the optional PowerLink connection. The PowerLink option allow connection of PowerLink accessories, such as the jump start cable.

Price range: $104.95 through $124.95

Switching lead is changed to tail light using a splitter ( included ).

CB500X PC-8 Fuse Box Kit

Out most popular fuse box. Over 10,000 sold. RTW proven. Stainless fittings. durable Japanese board and relay with US made connectors. Plug and Play – easy installation.

Price range: $45.95 through $124.95

Switching lead now uses plate light connector.

Honda CB500X 4CS Fuse Panel Kit

4 output fuse box for the CB500X. Plug and Play kit. Sealed against the weather. 

Price range: $64.95 through $74.95

Dual Lock Super Stong Velcro 2 Pieces

Super Strong dual lock Velcro. This is industrial strength Velcro by 3M. Two 8cm strips.

$6.95

Accessory Cables & Fuse Holders

CB500X Aux Power Splitter

$19.95

CB500X auxiliary splitter. Fits the under seat auxiliary connector.

CB500X, CB400X/F, CBR600F Indicator & Plate Light Splitters

Price range: $14.95 through $16.95

CB500X indicator and plate light splitters. Use when adding extra light to your bike, or when you need a switched input for a fuse box ( plate light ). Fits CB400X/F and CBR650F also. 

Sold individually.
For indicators use Orange and Blue. The plate light is usually White.

CB500X Aux Power Leads

$14.95

Honda CB500X auxiliary power lead. Use for connecting accessories to the OWM auxiliary connector, under the seat.

CS Kit Extensions

Price range: $10.25 through $16.95

– pre-made solutions to connect from the CS Kits to your accessory.

– male connector on one end and a female on the other end, male plugs into a CS Kit output connector – then you can use one of the included (comes with every CS Kit) male connectors on your accessory wires to complete the circuit – give you a modular way to connect your circuits

CS Kit Leads with SAE Plug

Price range: $10.95 through $18.95

2 Prong SAE Plug for battery chargers, etc., WITH 16 AWG wire. (NOW WITH SAE CAP)

CS Kit Leads with T-Connector

Price range: $10.95 through $18.95

2 Prong T-Connector for Powerlet and Hella type Socket – with 18 AWG wire

These fit the XL750 Transalp

CS Kit Leads with .250″ Spade Connector

Price range: $10.95 through $18.95

CS Kit Leads with 1/4” Pushons

These fit the XL750 Transalp

CS Kit Sealed Splitter

$19.95

CS Splitters – NOTE: all CS Splitters are now a more compact 15 cm (6 in). These splitters are designed to allow you to power even more accessories from your CS Kit. All splitters are 15 cm(6”) long. They are made of high quality Yazaki wire of 0.75 sqmm (18 AWG), with high temp flexible sheathing. You can order any of the combinations below and more. Pick the connectors you need for your accessories.

Fits CB400X ( not CB500X )

CB400X Auxiliary Splitter – [4 Pin]

Fits the auxiliary power outlet under the seat ( between riders seat and pillion seat ). Allows connection of two devices to the factory connection.

$24.95

CB500X Tail Light Splitter

Provides access to the tail and brake light signals for addition tail lights or a top box or side case lights. Avoid overloading by keeping current draws below 2A, or use a relay. Can be used as the switched input for any of the fuse panel kits on this page, purchased separately ( we will refund $10 of the purchase price, when purchased as an alternative to the standard aux switching lead with any fuse panel order ). Leads are 30cm. Includes Yazaki bullets to mate to the cable bullets.

$19.95

Connectors