Honda NX500
Table of Contents
PowerLink versions shown. Switching lead has been updated to use the ABS Connector under the seat for easier installation ( not shown ).
NX500 PC-8R Fuse Box Kit
ABS Connector break out cable. This has a “Switched Power,” “Battery,” and “Ground” connection. These are low current connections so should only be used for trigger signals, not as a source of power. Keep current draw to 1A or less. Used diode or diode/resistor noise suppression ( default on EB products for the NX500 ).
Honda NX500 Switched Power Trigger Lead
The Honda NX500 4 Pin ABS Connector lead provides a switched power source i.e. a trigger signal for relays or low power devices. Do not connect high power devices to this lead. Recommended current < 1A.
Honda NX500 4 Pin ABS Connector Splitter
ABS Connector break out cable. This has a “Switched Power,” “Battery,” and “Ground” connection. These are low current connections so should only be used for trigger signals, not as a source of power. Keep current draw to 1A or less. Used diode or diode/resistor noise suppression ( default on EB products for the NX500 ).
Fit the NX500 and CB500X Honda Models.
CB500X, CB400X/F, CBR600F Indicator & Plate Light Splitters
NX500 indicator and plate light splitters. Use when adding extra light to your bike, or when you need a switched input for a fuse box ( plate light ). Fits CB400X/F, CB500X and CBR650F also.Â
Sold individually.
For indicators use Orange and Blue. The plate light is usually White.
Even if not shown, you can order PC-4E, PC-8E, PC-8 and other fuse boxes.
Just email us and we will add to the site. You can also order by email, if the item is not shown.