Motorcycle Switch Options

Table of Contents

Daytona Bar Mount Switch -[Slim]

Daytona switch for motorcycles. Slim lineup, this is what they call the see-saw type. They have toggle types also. These are not made in Japan, as many sites claim. But they are decent quality. We recommend for 10A or less, irrespective of their spec. SPST ( on/off ). Dimensions (L x W x H) 21.6 x 9.5 x 3.8 cm
International Protection Rating IP65. 15A rated 

Price range: $35.00 through $39.00

Handlebar Rocker On/Off Switch (5A) – For 7/8” and 1” handlebars – [SPST]

– 16” (40 cm) sheathed wire leads. 
– only 3/4” (2 cm) wide.
– great for switching Auxiliary Lights or Headlights.

$24.95

Waterproof Little Pushbutton Switch SPST (10A) With Cap

Small push button with sealing rubber cover, in both momentary ON and ON/OFF configurations with 12cm (4 1/2”) leads. Includes the cap.

$8.95

Waterproof Little Push Button Switch SPDT (4A) With Cap

Small push button with sealing rubber cover, ON/OFF configurations with 12cm (4 1/2”) leads. Fits in a 3/8” (9 mm) hole. Includes the cap.

$16.99

Red Cap Option For Little Pushbutton Switches

Highlight your Little Push Button switch with a Red rubber cap. The switches come with a black cap as standard. This is an addition cap in red. So if you order this and a Little Push Button Switch you receive both.

$4.00

Toggle Switch (20A) On/Off SPST

These housings snap together to give multiple Contura switches a nice finished look. Choose a single or multi housings for more than one switch.
$10.95

Toggle Switch (20A) On/Off DPST

Sealed toggle switch comes with full rubber boot. Fits into a 7/16” (11mm) hole. DPST design ON/OFF actuation with four 1/4” tabs. See tab assignments here.

DPST means it switches two sets of contacts on and off.

$11.95

Toggle Switch (10A) On/Off SPST

Sealed toggle switch comes with full rubber boot on the switch top. The bottom is fully rubber encased. We include wire sheathing and bullet connectors to complete your install. Fits into a 7/16” (11mm) hole. SPST means it switches one set of contacts on and off.
$16.95

Carling Contura Rocker Switches

LED SPST Rocker Switch (20A) -[ Contura ]

Panel mount. LED illumination, green, marker  and orange ON indicator. Accepts push on 1/4” receptacles. Fits a hole 1 3/8” by 13/16” (35 mm by 20 mm)

$13.79

Amber Light Contura DPST Rocker Switch (20A)

The lighting in this Contura switch differs slightly from the SPST switch above, in that it has no running light, just an amber bulb that’s ON when the switch is turned on. Accepts push on 1/4” receptacles. DPST switch.

Fits a hole 1 3/8” by 13/16” (35 mm by 20 mm)

$15.95

Contura Switch Single Housing

These housings give the Contura switches a nice finished look. Choose a single or multi housings for more than one switch. Opening should be 47mm by 23mm. To cut the opening the best way is to cut a bit smaller, then file it out to an exact fit.
$2.45

Contura Switch End Housing

These housings snap together to give multiple Contura switches a nice finished look. Choose a single or multi housings for more than one switch.
$2.25

Contura Switch Center Housing

These housings snap together to give multiple Contura switches a nice finished look. Choose a single or multi housings for more than one switch.
$2.25

Contura Switch Blank Plate

These housings snap together to give multiple Contura switches a nice finished look. Choose a single or multi housings for more than one switch.
$1.79