Honda Africa Twins (rd03-rd07)
Brake/Tail Light Adapters – allow installation of aux brake and tail lights, brakelight modulators etc. These adapters plug into where your tail light wires connect under the seat near the rear. Power your topbox, aux brake light, etc.
Two Versions:
Version 1 – wires are straight take-offs, not for brakelight modulators
Version 2 – for brakelight modulators, also allow aux tail lights – V2 has 4 wires – for the brakelight it has an input and an output wire
Honda Africa Twins (rd03-rd07) XRV750 Brake/Tail Adapter V1
Version 1 – wires are straight take-offs, not for brake light modulators.
Version 1 in Image. Version 2 has 4 wires ( one brake in and one brake out for the modulator circuit ).
Honda Africa Twins (rd03-rd07) XRV750 Brake/Tail Adapter V2
Version 2 – for brake light modulators, also allow aux tail lights . V2 has 4 wires – for the brake light it has an input and an output wire
Honda XRV750 Fuel Pump – [Genuine 16710-MAY-305]
Genuine Honda XRV750 fuel pump assembly. Supplied by Honda Japan.
Should fit 93 and later XRV750’s. Please check the part number for your bike.
We do not accept cancellation, returns or exchange once the order has been placed,
as we cannot cancel the order with the supplier. Warranty does not include shipping
costs, or damaged caused by dirty tanks, bad or dirty fuel and misuse or improper installation.
Honda XRV750 Rectifier Adapter Cable – [90-95]
Honda XRV750 Rectifier Adapter Cable for 1990-1995 models, though please check your bike before ordering. We believe the DC side connector changed in 1996 to a female 4 pin. Prior to that it was a 6 pin male connector. This cable allows replacement of the OEM rectifier with a newer technology MOSFET FH020AA rectifier ( available here )
The cables will also work on the SH847 Series rectifier, though you will need a mount bracket as the hole spacing is different.
Honda XRV750 Rectifier Adapter Cable – [96-03]
Honda XRV750 Rectifier Adapter Cable for 1996-2003 models, though please check your bike before ordering. We believe the DC side connector changed in 1996 to a female 4 pin. Prior to that it was a 6 pin male connector. This cable allows replacement of the OEM rectifier with a newer technology MOSFET FH020AA rectifier ( available here )
The cables will also work on the SH847 Series rectifier, though you will need a mount bracket as the hole spacing is different.