talon redHonda Talon 1000X

PC-8 50A Fusepanel Kit for 2 Seater Honda Talon

This Kit is fully plug and play and is designed for easy install and a perfect fit on your Talon. This Kit has a pair of connectors that plug inline on the brake/tail connector, providing switching of the kit from the taillight.

The PC-8 is a superb fuse panel, full of all the features you need and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. The Kit is made from highest quality high temp wire and sheathing. To install your circuit wiring, just strip your wires and insert into the PC-8 outputs and tighten the screws. Both power and ground terminal blocks are built in.

The PC-8 mounts right up front where you can easily wire in your accessories.

This Kit is 50A max capable using dual main fuseholders, 30A max for the 6 switched circuits, and 20A max for the 2 unswitched circuits.

All about the PC-8 with closeup pics and more here.

Complete plug and play kit, with all the wiring, a 40A relay, fuses, a PC-8 fusepanel, and more.

Battery Connect Complete Kit

Powerlink Connect Complete Kit

(pic coming soon)

NEW! - The Powerlink Connection option is the same Kit with a connector on the main wires, to plug into the Powerlink Battery Leads, making the overall total Kit the same length. Custom Powerlink Battery Leads are included with this Kit. The Powerlink option allows quick disconnection of the PC-8 Kit for jump starting your bike or another bike from yours, or using a splitter you can hookup the PC-8 and another high current device like a high powered horn. Read all about the Powerlink System and it’s features here.

Battery Connect Complete Kit for 2 Seater $159.95

 If you have a 4 seater and want a Kit, contact us for a good deal. We suspect a slightly longer Kit is needed.

It is convenient to mount the PC-8 with Dual Lock. You can buy some at the bottom of this page.

PC-8 Specifications and Features:

  • - 4 threaded insert nuts provide case mounting and fuse panel installation mounting points
  • - comes with an assortment of ATM fuses, one for each output circuit and a few extras
  • - 8 hot + outputs (2 unswitched circuits, 6 switched circuits)
  • - Switched circuits are turned off when the bike is shut down. An unswitched circuit is always hot - can be used for charging the battery
  • - 8 ground outputs - much better to ground your auxiliary circuits here than on a bike’s frame
  • - maximum fuse panel capacity 50 Amps (30A/20A - switched/unswitched)
  • - maximum circuit capacity 20 Amps (15A continuous)
  • - maximum output wire size 12 AWG (3 sqmm)
  • - all hardware is stainless steel (except input posts which are tin plated steel)
  • - black satin polycarbonate cover makes unit splash-proof yet allows it to breathe and stay cool
  • - cover mounting tabs on each end can be broken off or left on, depending on mounting choice
  • - simple robust design means no overheating and no problems with vibration
  • - I designed this fuse panel with ease of mounting a priority. Therefore there are many mounting options: Dual Lock on back of case, fine threaded screws from back of panel, self tapping screws from inside through PCB inserts to panel, or nuts and screws on the case mounting ears at each end of the case.


Dual Locks Strips - Two pairs of mating 3” (8 cm) Dual Lock strips. Great for many other projects too, this material has 5 times more holding strength than regular Velcro. Strips have excellent adhesive on the back. Clean surfaces with alcohol first.

 2 Sets 3 Inch 3M Dual Lock Strips $2.95


More PC-8 mounting accessories click here.


Front Power Leads - plugs in behind dash on factory aux power connector - to use this and the PC-8 Kit you also need the splitter.

 Front Aux Power Leads $12.95


Much more to come for this vehicle, check back to see what’s new.