Brake Light Modulator
Modulates the brake light to gain attention from following drivers. Strobes the rear brake light 3-4 times and then to full on. You can tap the brake lever to keep the strobe going. Bike specific kits come with a splitter, so you can bypass the modulator when needed.
Two types, one for LED brake lights and one for Incandescent brake lights ( normal filament bulb ).
Table of Contents
Brake Modulator
Select connection type and then technology. LED brake light use less current and flash faster than incandescent types, so we have a unit for each technology. Strobes the brake light 3-4 times before switching the light to solid ON. Leads are 6″ or 15cm. Be noticed.
Add this option if you want Posi-Tap to connect to Flying Leads.
POSI-TAP – [PTA1800M]
Option for a the brake modulator, if ordered with flying leads ( unterminated leads ). Allows you to tap into existing wiring.
This kit includes the splitter and the brake light modulator. Shown is a
KTM 1290 Adventure version.
Brake Modulator with Splitter – [Custom]
This is a brake light modulator with splitter cabled ie plug and play. You will need to email us pictures of your brake light connector, for us to fulfill this order. Bike Specific kits can be found on the bike specific pages. This is for a custom one off kit or for a bike not listed on the bike specific page.