Ducati Scrambler Sixty2 - ( 2015- 2020 )
Table of Contents
Scrambler Sixty2 2CS Solution
This is a plug and play kit for the Ducati Scrambler Sixty2, that provides two fused switched output. The outputs
are live, once the motorcycle is turned on. The switched signal is taken from the rear tail light connector.
Scrambler Sixty2 2CS
-Comes with an assortment of ATM fuses, one for each output circuit and a few extras
2 hot outputs (2 switched circuits)
$49.95
Scrambler Sixty2 Switching Lead
Disconnect the battery negative and tape up the ring terminal so it does not touch the battery negative. Disconnect the battery positive lead
$14.95
2CS fully installed and out of sight under the battery cover.
Battery Cover removed
Tool Kit Removed
Disconnect connector in front of tool tray and remove 4 screws
Under Tail ( if necessary )
4 Screw to drop down
Finished & All Working
Accessing Tail Light Connector
Tie Up Excess Cable
Tail Light Cable Connected To Splitter & In Position
Completed Installation
