EB-110D Motorcycle LED Lights
Large 110mm LED riding lights with 7,450lm per light ( 14,900lm/set ). These lights are a combination flood/spot with 20% spot and 80% flood, making for super illuminated night riding.
Each light comes with 12 months warranty. All connections utilize Japanese connectors. Lights come with full wiring kit including dimmer and bar mount switch. Lights also come with brackets and bar clamps that fit 22mm – 25.4mm ( 1 inch ) bars. The connector is a 3 pin MT 090 male and the wire length is 15cm ( 5.9″ )
| SPECIFICATION | VALUE | SPECIFICATION | VALUE |
|---|---|---|---|
|
DIAMETER: |
110mm ( 4.3″ ) |
LUMENS LIGHT/SET: |
7,450lm/14,900lm |
|
LENGTH: |
80mm |
CCT: |
6,500K |
|
HEIGTH WITH BRACKETS: |
138mm |
LED TYPE |
SST-40 x 7 |
|
WATERPROOF: |
IP67 |
COLOR: |
White |
|
LENS CAP INCLUDED: |
Yellow |
VOLTAGE: |
12v-16v DC |
|
BAR MOUNT INCLUDED: |
22mm – 25.4mm |
POWER: |
110w |
|
WARRANTY: |
12 Months |
OPERATING TEMPERATURE: |
-40c to +80c |
EB-110D – Motorcycle Riding Lights
Large and powerful auxiliary lights. With built in dimmer, you can use them as riding lights or turn them to full power to light up the road. Have strobe input & high beam input. Strobe can be connected to your horn to cause the lights to strobe when you press the horn. High beam input will set the lights to 100% when you activate your high beam. The dimmer setting is stored in memory, so remembered when you restart your bike.
The lights have a very nice built in controller. Press the dial to change modes. Turn the dial to adjust dimming level. The control box has a built in electronic relay. Complete kit ready to install. No programming or need to apps. The lights come with yellow lenes, that can be used to change the color to yellow or as protection for the light lenses. These lights also have built in temperature controller. So they will not overheat when in traffic. It is hard to find such full featured lights that are as bright as these.