1 Circuit Solution - GREAT FOR AUX LIGHTS

– These wiring kits are all part of a modular system that uses the same connectors and parts. We make various compatible extensions, leads, and splitters further down this page

For the most modest power requirements – easy to install, tough and rugged construction. Perfect for bike rentals, your second bike, etc. Max capacity 15A.

Switched version uses a small 20A relay as shown above. Output is only on when the bike is on. A switching lead must be connected to a switched (+) source on the bike. A PosiTap is provided for easy and secure connection.

Comes with mating sealed connector, you can easily install on your wires, or buy pre-made leads, splitters, accessories and more on the Accessories Page. You can add a splitter to power two devices. All Japan components manufactured by hand in Japan by Eastern Beaver.

Powerlink Option:

With this option, instead of battery ring connectors, a 2P sealed high current connector is installed to connect to our Powerlink system. With this option you must choose and buy a Powerlink Battery Leads unit. The Powerlink system allows use of our Jumper Cables, or you can use a Powerlink Splitter to connect this kit plus one other, for example a High Power Horn Kit, or Headlight Relay Kit, etc.

1CS Sealed

Compact sealed 1 output switched power source. Rated at 15A continuous, 25a peak.  Length is from battery to output connector. Fuse holder holds a spare and main fuse. Japanese connectors and relay. PowerLink option includes battery side cable.

Price range: $29.95 through $40.95

Protective Diode in Switching Wire Option

A protective diode can be ordered inline on the ignition switched lead, preventing reverse current flow back to the bike. This is highly recommended for CANBus bikes.
$5.95

Crimper for sealed connector terminals:

The Hozan P-706 does a pro job on these types, go here to buy. This is a great tool for a home shop, most connectors on modern bikes are this type.

You don’t need a crimper to install these. You can pinch and solder if you know how to solder. I have a page about crimping and soldering here.

CS Sealed Leads and Extensions

Various pre-finished leads of the highest quality are available for running your circuit wires from the CS Kit under the seat to up front to power a socket, SAE, aux lights, or other devices. Leads are available for a variety of power socket connections to plug in directly. Extensions can be used where you install the male connectors that come with the CS Kit on the wires of your device (like an automotive socket with pigtails), everything then plugs together. Wires, connectors, and sheathing are high temp, highest quality, Japan made by Eastern Beaver.

CS Kit Extensions

male connector on one end and a female on the other end, male plugs into a CS Kit output connector – then you can use one of the included (comes with every CS Kit) male connectors on your accessory wires to complete the circuit – give you a modular way to connect your circuits
Price range: $10.25 through $16.95

CS Kit Leads - these leads have specific terminating connectors for different accessories

CS Kit Leads with SAE Plug

2 Prong SAE Plug for battery chargers, etc., WITH 16 AWG wire. (NOW WITH SAE CAP)
Price range: $10.95 through $18.95

CS Kit Leads with T-Connector

2 Prong T-Connector for Powerlet and Hella type Socket – with 18 AWG wire
Price range: $10.95 through $18.95

CS Kit Leads with .250″ Spade Connector

2 1/4” Sheathed Push-on Receptacles for Automotive Sockets etc. – with 18 AWG wire
Price range: $10.95 through $18.95

CS Kit Sealed Splitter

These splitters are designed to allow you to power even more accessories from your CS Kit.

All splitters are 15 cm(6”) long.

$19.95

2 Position .090 Waterproof MT Connector.

Fits wires from .5mm – 1.25mm (22 – 16 AWG).

L and S refer to the seal size ( there are 2 sizes ). Use S with smaller diameter wires. Seals on each wire.

Price range: $1.95 through $3.95