Honda CRF250 & CRF300L ( including Rally )

Table of Contents

PC-8R Accessory Fuse Boxes

PC-8R accessory fuse box kits for the CFR250 and CRF300 models. For the MD44 and MD47 variants, the PC-8R is mounted under the pillion seat area. For the MD38 models, the PC-8R is mounted in the storage under the left side panel. These kits are plug and play ( no modifications to the bikes OEM wiring ). Designed to last as long as the bike itself.

Honda CRF250L, CRF300L & Rally PC-8R Kit – [MD47]

Plug and play accessory fuse box for the CRF250L, CRF250L Rally, CRF300L and CRF300L Rally models. Uses a splitter on the plat light connector for switched input.

$114.95

Honda CRF250L & Rally PC-8R Kit – [MD44]

Plug and play accessory fuse box for the CRF250L, CRF250L Rally, CRF300L and CRF300L Rally models. Uses a splitter on the plate light connector for switched input.

$115.95

Honda CRF250L PC-8R Kit – [MD38]

Plug and play accessory fuse box for the CRF250L MD38. Uses a splitter on the tail light connector for switched input.

$118.95

Dual Lock Super Stong Velcro 2 Pieces

Use on either the PC-8 or the PC-8R to mount the accessory fuse box to a flat surface. Super strong Velcro by 3M.

$6.95

PC-8 Accessory Fuse Box

Highest spec accessory fuse box option for the CRF250L, CRF250L Rally, CRF300L, CRF300L Rally. Rated at 50A total current capacity. External relay for easy maintenance, when necessary.

Honda CRF250L PC-8 Kit -[MD44 & MD47]

Plug and play accessory fuse box for the CRF250L MD44 & MD47. Uses the front 2 Pin Aux power connector ( left front of bike ).

$109.95

CS Accessory Fuse Box Kits

Shown is 2CS – Available are 1CS, 2CS, 3CS, 4CS
( 1 output, 2 output, 3 output, 4 output )

This kit is very easy to mount on the CRF250/300L and Rally. The relay mounts up under the rear fender as does the Number Plate Light Splitter and the
output fuses and outputs are available near the existing fuse box ( see image below ).

Honda CRF250L, CRF300L & Rally CS Kits – [MD47 & MD44]

Flexible accessory fuse box kits. These kits are usually easier to install as the outputs and fuse holders are separate and the kits can be placed where the owner wants. Generally mounted under the pillion seat.

$109.95

Accessory Cables

CRF250L & X-Adv Front 2P Aux Connector Splitter -[MD44 & MD47]

2P Aux Connector Splitter – This splitter plugs into the stock 2P aux power connector left front of wiring loom – allows factory leads and our PC-8 Kit to plug in. You need this if your 2P connector is in use with factory aux lights or something else.

$24.95

CRF250L & X-Adv 2 Pin Aux Connector Lead

Use to connect electrical devices to the front ( left ) 2 pin aux power connector port. The front left aux power connector port provides switched power.

$15.95

CRF250L & CRF300L Number Plate Splitter Cable – [MD44-MD47]

Plate light splitter for CRF250/CRF300 all versions. Provide a source of switched power, under the seat ( for fuse boxes or other accessories ). We recommend to keep current draw to 2A or less.

$16.95