Honda VFR1200
Table of Contents
PC-8 50A Fusepanel Kit for Honda VFR1200
This Kit is fully plug and play and is designed for easy install and a perfect fit. This Kit has a switching connector that plugs into the stock 6P aux power connector left front of wiring loom.
The PC-8 is a superb fuse panel, full of all the features you need and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. The Kit is made from highest quality high temp wire and sheathing. Just strip your circuit wires and insert into the PC-8 outputs and tighten the screws. Both power and ground terminal blocks are built in.
This Kit is 50A max ( total ) capable using dual main fuseholders, 40A max for the 6 switched circuits, and up to 20A max for the 2 unswitched circuits.
Honda VFR1200 PC-8 50A Fuse panel Kit
The PC-8R is the worlds most reliable accessory fuse box, for motorcycles. Used by hundreds of Round The World Travelers. Providing 50A capability with 6 switched and 2 un-switched outputs.
Generic PowerLink kit shown. VFR1200F specific kit will be supplied.
Honda VFR1200 PC-8R 40A Fuse panel Kit
The PC-8R is a compact 40A capable accessory fuse box ( PDM ). With over 1,000 installations in its first year, it has proven itself a reliable and compact accessory fuse box.
Accessories & Cables
Dual Locks Strips – Two pairs of mating 3” (8 cm) Dual Lock strips. Great for many other projects too, this material has 5 times more holding strength than regular Velcro. Strips have excellent adhesive on the back. Clean surfaces with alcohol first.
Dual Lock Super Stong Velcro 2 Pieces
Honda VFR1200F 6P Aux Connector Splitter
6P Aux Connector Splitter – This splitter plugs into the stock 6P aux power connector left front of wiring loom – allows factory leads and our PC-8 Kit to plug in.
Honda VFR1200F 6P Aux Connector with Lead
6P Aux Connector with Leads for VFR1200
This connector plugs into the stock 6P aux power connector and gives you 36” (92cm) of high temp 18 AWG wire with high temp sheathing. This connector is fused on the bike aux power fuse. Honda only makes an expensive and complex adapter for aux power, this is the DIY simple solution to power your GPS, charge your phone, etc. Using the splitter above you could connect these Leads and and the PC-8 Kit connector to the bike’s 6P connector.