Kawasaki KLR650
Table of Contents
Kawasaki KLR650 – PC-4E Accessory Fuse Box
Accessory fuse box for the KLR650. Electronics fuse box. With 4 outputs, of which 1 is battery direct and 3 are switched. Rated at 30A continuous. Switched outputs are 10A, 10A and 15A each. Waterproof, rugged design.
Kawasaki KLR650 – ABS Control Switch
This kit allows you to switch off the ABS unit for off-road riding. The switch has a LED that we flash to notify you that the ABS unit is turned off. We use the switch to control a relay. The relay is default, Normally Closed (NC ) so in the event of a relay failure, the ABS unit will work as normal. Because this kit is plug and play, you can simply disconnect the kits from the ABS connection, if you ever decide to sell the bike or just don’t want to use the functionality
Kawasaki KLR650 – Fog Light High Beam Control
This kit allows you to control the OEM Fog light kit, by the high beam switch. When high beam is switched on, the fog lights will work. When high beam is off the fog lights will be off. The OEM fog light switch will work as a fog light kill switch. Uses a Japanese automotive grade relay, Yazaki wire and Sumitomo heat shrink. Built to last.
Kawasaki KLR650 – High Beam Breakout
This splitter/break-out cable provides a high beam signal for accessory lights. Used in our Fog Light High Beam Control kit, to allow control of the OEM fog lights from the Hi/Lo switch. Can be used with other dimmers & light kits that need a high beam input signal.
Kawasaki KLR650 – Accessory Power Relay Kit
Includes a Panasonic relay & two LittleFuse MiniATM 15A fuses to enable power to your fog light & USB port.
Kawasaki KLR650 – Tail Light Breakout Cable
Provides break out cables for the brake, tail light and a ground. Can be used to power extra tail lights or top box lights or as a source of switched power.
Kawasaki KLR650 – Number Plate Light Breakout
Provides a source of switched ( ignition ) power for relays or fuse boxes. Located under the pillion seat, so easy to access. Recommended to keep current draw under 2 amps
on this connection.
Kawasaki KLR650 – Front Accessory Splitter
Provides a source of switched ( ignition ) power for relays or fuse boxes. Located under the pillion seat, so easy to access. Recommended to keep current draw under 2 amps
on this connection.
You can buy extra connectors on this page HM 090