SAE to Panel Mount – [Weatherproof]
Price range: $15.95 through $19.95
Description
SAE to Panel Mount – [Weatherproof]. Bulkhead connector SAE cable. Approximately
33cm long. 12AWG ( 3.3㎟ ) tinned copper wire. DC 12v to 24v tested. Rated at 7A continuous
or 15A peak current. The panel mount connector has a rubbed cap to protect from increment weather.
Its best to blow out any water, after using in the rain, to avoid corrosion. Do no mount facing up or
water will pool in the connector. Comes with support plate and mounting screws ( most sites do not include the support plate but it
is very useful when installing the Panel End to soft luggage ).Hole spacing is 27mm
Panel Mount Diameter is 48mm
Cable length is 26cm or about 10.2″
Termination refers to the non Panel Mount end, and you can choose SAE or stripper wire, or CS Kit or HD CS connector as the
termination for that end. If SAE or CS Kit or HD CS are chose extensions are available elsewhere on this site.
Additional information
| TERMINATION | SAE Connector, Stripped Wire, CS Kit / PC4E / PC-8E MT 090, HD CS Kit .250" CNA Connector |
|---|


![SAE to Panel Mount - [Weatherproof]](https://www.easternbeaver.com/wp-content/uploads/2025/11/SAE_Bulkhead_600.jpg)











