FJR1300 Electrical Accessories
Yamaha FJR1300 - PC-8 50A Fuse Panel Kits
This superb fuse panel is full of all the features every rider has ever wanted and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. Kit is made from highest quality high temp wire and sheathing. Just strip your circuit wires and insert into the PC-8 outputs and tighten the screws. Both power and ground terminal blocks are built in.
The Powerlink connection allows quick disconnection of the PC-8 Kit for jump starting your bike or another bike from yours, or using a splitter you can hookup the PC-8 and another high current device like a high powered horn. Read all about the Powerlink System and it’s features here.
This Kit is now 50A capable using dual main fuse holders. And it is now fully plug and play using a connector for the tail light ( we provide a splitter )
FJR1300 PC-8 PowerLink Kits
PC-8 with Relay Kit for FJR [Powerlink Connect]
Don’t stack connections on the battery terminals. The PC-8 allows you to connect 6 switched and 2 un-switched accessories to your bike. Plug and play so no modifying your OEM harness. Most units last over 15yrs of hard use, including hundreds of RTW travelers.
PC-8 Relay Kit Only (No PC-8) for FJR – [Powerlink Connect]
PC-8 PowerLink wiring kit only. Does not include the PC-8. Use when moving your fuse box to an FJR1300 from another bike, or to upgrade your existing harness to this monster.
You can also fit any of our CS Kits to your FJR, look here for more modest power users. Just select the CS kit you want & send us a note. We will install a PowerLink connector to the CS kit. You also will need to order a PowerLink battery lead ( longest ) with the CS Kit.
Installation Note ( Switching Lead ):
We use the number plate light as the switching input. Please check which switching lead your bike needs. Our understanding is that up to 2015 bullet connectors are used and from 2016 a 2 pin JST connector is used. The 2 pin connector is usually located on the left side of the sub frame level with the front of the passenger seat. The bullet connectors are usually located on the left side of the sub frame, but to the left of the riders seat.
FJR1300 PC-8R PowerLink Kits
PC-8R 40A kits for the FJR1300. The PC-8R is a little more compact than the PC-8 for a cleaner install, though it has a 10A lower overall current capacity. It uses the same switched input source. This unit can be ordered with an optional delay on the trigger in, to power your accessories up, after the bike has started ( 15s delay ). This can be very useful for customers who live in countries where the winters are cold and battery power is reduced ( usually 10c and under – lead acid batteries loose about 10% at 10c and 20% at 0c ).
Yamaha FJR1300 PC-8R Kit
Updated version of the PC-8 with built in relay. Proven reliability with over 2,000 sold and no failures. Can handle up to 40A which is more than most bikes have available, after power for the ECU/ABS/lights is considered.
Up to 2015 models use bullet connectors for number plate light.
2016 and later use JST 2 Pin connector for number plate light.
Accessories For All Fuse Boxes & CS Kits
Fusebox Trigger Delay – [DL-Mod-1]
Inline delay on Trigger In for fuse boxes/PDM’s. Standard is 15s or custom lengths up to 90s are possible. Works with Eastern Beaver & other fuse boxes.