Super Tenere Light Kits & Accessory Cables
Table of Contents
KIT 1: Includes EB-60A, 4CS accessory fuse box, Dimmer, Delay Unit, Wiring Kit & Headlight Splitter
KIT 2: Includes EB-60A, Dimmer, Delay Unit, Wiring Kit & Headlight Splitter
KIT 3: Includes EB-60A, Dimmer, Wiring Kit & Headlight Splitter
KIT 4: Includes EB-60A & Wiring Kit.
Super Tenere 1200 Light Kit -[EB-60A]
EB-60A LED riding lights for the Super Tenere. 4 kits types available from complete to basic. The power source can be the Aux Power connector, or any of our accessory fuse boxes. One set of light included with each kit.
DL-MOD-1 – if a fuse box is the power source, the small box will delay the fuse box powering up, so that all battery power is available to start the bike. Delay is 15 seconds.
( can work with any fuse box as long as current is under 0.2A ( most relays ) ).
EB-DimR – this unit has an On/Off switch with dimming control from 10% though to 100%. It also has a high beam input which switches the lights to full power when the high beam is ON.
Aux Light Splitter – splits the AUX power output into 2 so you can use one output to switch on the fuse box and one for another purpose.
Head Light Splitter – provides a signal for dimmers that have a high beam input. Causes lights to switch to full brightness.sa
KIT 1: Includes a set of EB-60A lights, 4cS accessory fuse box, LED dimmer to control LED brightness, plus high beam input that switched power to 100% on High Beam. It also includes a delay unit that allows 15s to start the bike, before accessories power up. Wiring kit for all above included.
KIT 2: Includes a set of EB-60A lights, a LED dimmer, a delay unit & high beam input plus associated wiring.
KIT 3: Includes the LED Dimmer and high Beam input splitter, with wiring kit.
KIT 4: Includes a wiring kit and a set of EB-60A lights. ( please note the EB-60A’s are very bright so this kit may not be the best option.
Super Tenere 1200 Headlight Splitter – [Gen 2]
Super Tenere Gen 2 High Beam Splitter. Provides a high beam signal for dimmers such as the EB-DimR or for relays using in light kits. The signal is high when the high beam switch is On, or when the ‘flash to pass’ switch is activated. We recommend to keep current draw to under 0.5A so as not to effect the headlight or headlight switch.
Super Tenere 1200 Headlight Splitter – [Gen 1]
Super Tenere Gen 1 High Beam Splitter. Provides a high beam signal for dimmers such as the EB-DimR. The signal is high when the high beam switch is On, or when the ‘flash to pass’ switch is activated.
We recommend to keep current draw to under 0.5A so as not to effect the headlight or headlight switch.
Mirror Mount Switch SPST & Dimmer Bracket
Super Tenere Gen 1 High Beam Splitter. Provides a high beam signal for dimmers such as the EB-DimR. The signal is high when the high beam switch is On, or when the ‘flash to pass’ switch is activated.
We recommend to keep current draw to under 0.5A so as not to effect the headlight or headlight switch.
Aux Light Splitter
Mirror mount switch for Gen 1 bikes. Dimmer can be mounted on top of the switch. Switch can be used for up to 10A current switching. Forward of the mirror hole is a mount point
for Oxford ( or other ) heated grip controller. Forward hole size is M6. Mirror hole size is M10.
Yamaha Tenere Aux Light Lead
You can use this adapter to power GPS, Aux Lights, and any other accessory using low or medium current draw. Wires, connectors, and sheathing are high temp, highest quality, Japan made and assembled by Eastern Beaver.