Super Tenere XT1200Z
Table of Contents
Accessory fuse boxes for the Yamaha Super Tenere 1200. The allow you to connect electrical accessories such as navigation aids, USB chargers, radar detectors, heated grips, battery chargers, heated gear etc., without making a mess at your battery connectors. They also increase safety by ensuring all devices are properly fused and take the load that the thin OEM wires were never designed to carry.
Yamaha Super Tenere PC-8 Kit
This special edition of the PC-8 Kit includes everything you will need to install on your Super Ten. We have made this kit longer to allow alternate PC-8 locations, even under the seat if you use a bracket for the PC-8.
This is a 40” Kit with plug and play switching adapter using the stock Aux. Lights Connector. The Aux. Lights connector is close to the battery and perfect for switching a Fuse Panel’s relay. Of course you can hookup any Auxiliary Lighting directly to the PC-8. If you already have aux lights using the stock connector, you will need to also buy our Aux Light Splitter.
The Powerlink option allows quick disconnection of the PC-8 Kit for jump starting your bike or another bike from yours, or using a splitter you can hookup the PC-8 and another high current device like a high powered horn.
This Kit is now 50A capable using dual main fuse holders.
Yamaha Super Tenere 1200 PC-8R Kit
The PC-8R is a superb fuse panel, full of all the features you need and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. 6 switched and 2 battery direct outputs. 30A or 40A rated depending on the wiring kit. Built in noise suppression for Canbus bikes.
The Kit is made from highest quality high temp wire and sheathing. Just strip your circuit wires and insert into the PC-8R outputs and tighten the screws. Both power and ground terminal blocks are built in.
Dual Lock Super Stong Velcro 2 Pieces
Dual Locks Strips – Two pairs of mating 3” (8 cm) Dual Lock strips. Great for many other projects too, this material has 5 times more holding strength than regular Velcro. Strips have excellent adhesive on the back. Clean surfaces with alcohol first.
PC-8 vs PC-8R Differences
The PC-8 is the original fuse box from Eastern Beaver. Over 15,000 have been installed in the last 15yrs. The PC-8R is its successor released in 2023. The PC-8R was designed to reduce the install space required with newer bikes often having less under seat space.
PC-8
50A Capable.
External Relay – easily replaced if a failure occurred ( they don’t fail ).
Rugged & proven ( favored by RTW travelers ).
6 Switched Outputs
2 Battery Direct Outputs
Plug and Play Kits
PC-8R
40A Capable
Internal Relay
Smaller Footprint ( takes up less space ).
Internal Noise Suppression – reduces any switching noise from the fuse box.
Same design principles so built to last, like the PC-8.
6 Switched Outputs
2 Battery Direct Outputs
Plug and Play Kits
3CS and 4CS kits here
Other accessories here