Due to Summer Holidays in Japan, shipping during the week of the 3rd though the 7th will be delayed ( post office and Fedex have a holiday ). However orders will be shipped in the sequence received and we hope to have shipping back to normal from the 10th. We apologize for any inconvenience.
H4 Lo And Hi Headlight Cut Adaptor - [Single Bulb]

H4 Lo And Hi Headlight Cut Adaptor – [Single Bulb]

$42.95

H4 Headlight Cut Adapter – Cuts both beams on one headlight.

Works on any H4 System, this adaptor basically disables or enables one of your headlight bulbs at the flick of a switch.

SKU: aa-af-h4-both-cut-no-switch Categories: , , , Tags: , , , ,

Description

H4 Headlight Cut Adapter – Cuts both beams on one headlight. Works on any H4 System, this adaptor basically disables or enables one of your headlight bulbs at the flick of a switch. Works on both beams of one bulb, saves 55-60 watts of power for your other accessories. Now you can run a pair of Auxiliary Lights and get that triangulation that you need to be noticed by cars. All high temperature wire, with high temperature sheathing. Sumitube shrinktube on all terminal crimps to seal out moisture and give excellent strain relief.
H4 Socket plugs onto one of your headlight bulbs. Can be used with or without my H4 Dual Relay Kit.
The removed headlight socket then plugs onto the H4 Coupler.
36” (92 cm) of wire is enough to reach to the fairing inner panel or to a handlebar switch.
You will need a DPST switch for this adaptor. See here (toggle) or here (rocker) for a switch for this adaptor.
Or you can use it with two SPST switches to control each headlight’s beam separately.

Related products