Description

The PC-8 is an accessory fuse box. It allows you to remove the wiring mess from your battery terminals and connect them to
a fuse box for a neat and tidy installation. Each circuit is fused individually, so no need for external fuses. There are 8 circuits
with 6 switched ( with the ignition ) and 2 battery direct. The switched can be used for Navi’s, heated grips, USB port and other
devices you want turned off when the bike is off. The battery direct circuits can be used for heated gear, battery tenders/chargers
or air pumps. They are always live. The PC-8 has been in production for about 14yrs and over 14,000 sold. Most of those are still
in use today. The PC-8 was designed by motorcyclist for motorcyclists and will outlast any other fuse box on the planet.

PC-8 Specifications and Features:
– 4 threaded insert nuts provide case mounting and fuse panel installation mounting points
– comes with an assortment of ATM fuses, one for each output circuit and a few extras
– 8 hot + outputs (2 unswitched circuits, 6 switched circuits)
– Switched circuits are turned off when the bike is shut down. An unswitched circuit is always hot – can be used for charging the battery
– 8 ground outputs – much better to ground your auxiliary circuits here than on a bike’s frame
– maximum fuse panel capacity 50 Amps (30A/20A – switched/unswitched)
– maximum circuit capacity 20 Amps (15A continuous)
– maximum output wire size 12 AWG (3 sqmm)
– all hardware is stainless steel (except input posts which are tin plated steel)
– black satin polycarbonate cover makes unit splash-proof yet allows it to breathe and stay cool
– cover mounting tabs on each end can be broken off or left on, depending on mounting choice
– simple robust design means no overheating and no problems with vibration
– I designed this fuse panel with ease of mounting a priority. Therefore there are many mounting options: Dual Lock on back of case, fine threaded screws from back of panel, self tapping screws from inside through PCB inserts to panel, or nuts and screws on the case mounting ears at each end of the case.