H4 Hi Or Lo Beam Cut Adapter
$36.95
Description
H4 Lo or Hi Beam Cut Adapters
Works on any H4 System, this adaptor allows you to turn off and on one headlight using any switch taking push on blade terminals. It’s available with push on spades, bullet connectors or Posi-Locks. This Kit will work with one of my H4 Headlight Relay Kits or with a stock H4 system. Works on HI or LO beam (depending on model), saves 55 (60 for HI beam) watts of power for your other accessories. Now you can run a pair of Auxiliary Lights and get that triangulation that you need to be noticed by cars. All high temperature 100o wire, with high temperature AH-6 sheathing. Sumitube shrinktube on all terminal crimps to seal out moisture and give excellent strain relief.
H4 Socket plugs onto your one headlight bulb. Your existing headlight socket plugs onto he H4 Coupler.
36” (92 cm) of wire is enough to reach to the fairing inner panel or to a handlebar switch.
Choice of switch connectors, push on female spades (.250” or .187”), bullet connectors, or Posi-Locks.
.
Additional information
BEAM CUT | Low Beam, High Beam |
---|---|
SWITCH CONNECTION | Female .250" Spades, 4mm Bullet Connectors, Posi-Locks |