H4 Dual Relay Kit w/One Headlight Cut Wiring

$91.95

As with a regular H4 Dual Kit but with built-in wiring for a Headlight Cut Switch

aa-aa-relay-kit-dual-h4-one-headlight-cut

x

Description

Shown above with Fuse Panel main leads (bare wires)

Same as regular H4 Dual Kit but with built in wiring for a Headlight Cut Switch (DPST). (Headlight cut adapters also available separately here.)

This Kit cuts both beams of the H4 Socket with the shorter leads. If you want to cut the right headlight, bring in the Kit’s main wiring from the right side. To cut the left headlight, bring in the main wiring from the left side.

You can buy a DPST switch for this Kit here (Toggle) or here (Rocker).

PLEASE NOTE – YOU CAN’T USE THE SPST ON/OFF BARSWITCH ( or any other SPST switch) WITH THIS KIT.

Choice of H4 Coupler or a Sealed Posilock option for relay triggering – see H4 Coupler Connection above.

Battery Connection option – has a fuseholder and terminals to connect directly to your battery.

Fusepanel Connection option – main lead wires are longer and sheathed to 6 in (15 cm) from ends (for aux fusepanels like my PC-8).

The 3CS Connection HD option – has a main lead connector to plug into my 3 Circuit Solution HD (NOT for 3CS Sealed).

Additional information

Coupler Option

H4 Coupler to Plug into Old H4 Socket, 2 PL1416s and 3/8th Shrinktube

Main Leads Connection

With Fuseholder – Battery Connect, Bare Wire Ends – Fuse Panel Connect