Honda X-Adv

Honda Xadv 3 Circuit Solution

This unit can power all your accessories and:

– allows you to hookup 3 or more accessories.
– all plug and play hookup, very simple install.
– you can charge your battery through one circuit.
– one circuit is always powered, two circuits are switched with the bike.
– all output connectors have direct to battery grounds.
– mating connectors (terminals and seals too) are included for installation on your circuit wires.
– each circuit is individually fused, plus a main fuseholder for the relay.
– unswitched circuit max current is 15A.
– switched circuits max current is 10A.
– total Kit current is 35A

Honda Xadv 3 Circuit Solution

Allows you to hookup 3 or more accessories. All plug and play hookup, very simple install. 2 switched and 1 unswitched output. You can buy splitter cables to increase the number of outputs, provided the total power is 35A or less.

Protective Diode in Switching Wire option available. Reduces relay noise. Generally this is not necessary but some customers request it.

OPTION

Clear

X-Adv 2P Aux Connector Splitter

This splitter plugs into the stock 2P aux power connector right rear of wiring loom – allows factory leads and our PC-8 Kit to plug in. You need this if your 2P connector is in use with factory aux lights or something else.

$24.95

X-Adv 2P Aux Connector Leads

These leads plug into the stock 2P aux power connector right rear of wiring loom, or the splitter above – allows factory leads and our PC-8 Kit to plug in. You can use this for powering aux lights, GPS, etc.

$15.95