MT-07 H4 Headlight Kit – [2025- ]
Price range: $82.95 through $99.95
Description
MT-07 H4 Headlight Kit – [2025- ] ( fourth generation ).
This kit is plug and play and allows you to remove the stock headlight and replace it with a H4 headlight. It provides a high power relay connections and allows the existing Hi/Lo switch to activate the new H4 headlight ( not included ). Included is noise suppression for the relays, so there will not be any negative effect on your bikes electronics. In our testing there were no error code thrown up. The high beam break-out board is also available separately, if you want to make your own kit.
If you choose Operation Style: Standard please make sure your headlight and bulb can handle the Lo and Hi beams being on at the same time. Some LED bulbs will not support this configuration as they can overheat.
This kit is rated at 13A @ 14v or for max 182w headlights.
NOTE:Â High Beam break out board have yellow & white wires ( colors incorrect in image )
NOTE: Battery Connect kits will include an in-line fuse holder ( not shown in image )
Additional information
| OPERATION STYLE | Standard ( both Lo and Hi on for Hi Beam ), H4 Style – Low OR High Beam ( not both at same time ) |
|---|---|
| POWER CONNECTION | Battery Connect ( M6 Ring Terminal ), Fuse Box Connect, Bullets ( 4mm ) Connect |


![MT-07 H4 Headlight Kit - [2025- ]](https://www.easternbeaver.com/wp-content/uploads/2026/06/MT-07_Headlight_H4_Kit.jpg)


![H4 Dual Headlight Relay Kit – [ In Bucket ]](https://www.easternbeaver.com/wp-content/uploads/2023/07/cxc-300x225.jpg)



![Yamaha MT-10 / FZ-10 PC-8 Fuse Panel Kit -[ 2016-2021 ]](https://www.easternbeaver.com/wp-content/uploads/2023/07/MT-10_PC-8-1-300x225.jpg)




