Description

This Kit is fully plug and play and is designed for easy install and a perfect fit. This Kit has a switching connector that plugs into the stock 6P aux power connector left front of wiring loom.

The PC-8 is a superb fuse panel, full of all the features you need and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. The Kit is made from highest quality high temp wire and sheathing. Just strip your circuit wires and insert into the PC-8 outputs and tighten the screws. Both power and ground terminal blocks are built in.

This Kit is 50A max capable using dual main fuse holders, 40A max for the 6 switched circuits, and or 20A max for the 2 unswitched circuits.
( total current must be under 50A. Examples 1:  30A on switched and 20A on unswitched. Example 2: 38A on switched and 12A on unswitched )

Complete plug and play kit, with all the wiring, a 40A relay, fuses, a PC-8 fuse panel, and more.

PC-8 Specifications and Features:

– 4 threaded insert nuts provide case mounting and fuse panel installation mounting points
– comes with an assortment of ATM fuses, one for each output circuit and a few extras
– 8 hot + outputs (2 unswitched circuits, 6 switched circuits)
– Switched circuits are turned off when the bike is shut down. An unswitched circuit is always hot – can be used for charging the battery
– 8 ground outputs – much better to ground your auxiliary circuits here than on a bike’s frame
– maximum fuse panel capacity 50 Amps (30A/20A – switched/unswitched)
– maximum circuit capacity 20 Amps (15A continuous)
– maximum output wire size 12 AWG (3 sqmm)
– all hardware is stainless steel (except input posts which are tin plated steel)
– black satin polycarbonate cover makes unit splash-proof yet allows it to breathe and stay cool
– cover mounting tabs on each end can be broken off or left on, depending on mounting choice
– simple robust design means no overheating and no problems with vibration
– I designed this fuse panel with ease of mounting a priority. Therefore there are many mounting options: Dual Lock on back of case, fine threaded screws from back of panel, self tapping screws from inside through PCB inserts to panel, or nuts and screws on the case mounting ears at each end of the case.

NEW! – The Powerlink Connection option is the same Kit with a connector on the main wires, to plug into the Powerlink Battery Leads, making the overall total Kit the same length. Custom Powerlink Battery Leads are included with this Kit. The Powerlink option allows quick disconnection of the PC-8 Kit for jump starting your bike or another bike from yours, or using a splitter you can hookup the PC-8 and another high current device like a high powered horn. Read all about the Powerlink System and it’s features here.